Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com ® LEDGlow Lighting, LLC • LEDGlow.com 1 I N S T A L L A T I O N G U I D E 1 . 877 . LED.GLOW • LEDGLOW.COM
Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com ® LEDGlow Lighting, LLC • LEDGlow.com 1 I N S T A L L A T I O N G U I D E Advanced Million Color Control Box with Smartphone Control WARNING: DO NOT USE THIS SOFTWARE WHILE OPERATING A MOTOR VEHICLE. THIS PRODUCT IS DESIGNED FOR OFF ROAD USE ONLY. PLEASE CHECK YOUR LOCAL AND STATE LAWS FOR THE PROPER USE OF THIS PRODUCT. Every state has different policies and procedures in place regarding aftermarket LED lighting accessories. LEDGlow is not responsible for any fines that you may receive while using this lighting kit. This kit is for off-road use only. Warning: The installation of this kit is recommended to be installed by a licensed professional. The improper installation of this kit will void all warranties. It is recommended to install each lighting strip using Adhesion Promoter, which allows for a much stronger bond between the adhesive tape of the light strip and the cleaned mounting surface of your Slingshot. Adhesion Promoter is an optional installation accessory that is NOT included with your Slingshot lighting kit. PLEASE READ THE FOLLOWING INSTRUCTIONS THOROUGHLY BEFORE INSTALLING AND OPERATING THIS LED SLINGSHOT KIT. 1. Upon receiving your new Slingshot lighting kit, we ask that you first test the kit to ensure it is functioning correctly. Plug the male connections from the strips and control box into the female connections of the harness. Connect the red power wire to the positive terminal of the battery and the black ground wire to the negative terminal of the battery. Once the wires are temporarily secure, power the kit to ensure full functionality before installing it. If everything appears to be working correctly, turn the kit off and disconnect the power and ground wires from the battery to prepare for installation. 2. Starting with the (2) 36” side mounted LED underbody tubes, clean the left and right side frame tubing with alcohol prep pads. 3. Apply adhesion promoter to the cleaned area. 4. Ensure the wire side of the tube is towards the front of the vehicle, and the LEDs are facing outwards. Attach the underbody tube by pressing it firmly onto the mounting location. Secure with zip-ties. SLINGSHOT LIGHTING KIT INCLUDES: • Bluetooth Control Box • (2) Wireless Remotes • Double-Sided Tape Pad • Zip Ties • LED Lighting Strips • (2) Power Harnesses TABLE OF CONTENTS Slingshot Kit Installation 1 Apple iOS Pairing Instructions 4 Android Pairing Instructions 5 Device Pairing Tips & Troubleshooting 6 LEDGlow Motorcycle Control App Functions 7 Settings 8 Wireless Remote Function 9 Terms and Conditions 10
I N S T A L L A T I O N G U I D E Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com ® 5. Repeat this process for the tube on the other side, and install the remaining light strips. We recommend installing the: (2) 24” Strips ʂ On the lower tubular frame supports under the front bumper ʂ On the rear swing arm (2) 18” Strips ʂ On each angled section of the front bumper (2) 10” Strips ʂ In the grille and undertail area. (4) 6” Strips ʂ On the headlight support bar facing the engine bay area on each side ʂ Behind the front suspension area on both sides (6) 2” Strips ʂ Under the seat belt trim on both sides ʂ Around the side roll cage on both sides 6. Zip-ties should be used to secure any strips to the frame rails. 7. Once everything has been installed, we recommend running the power wires for the strips through the back of the vehicle, to the compartment under the passenger side headrest panel. Be sure to keep the wires away from any moving parts. Note: Add-on harnesses are used in order to connect different groups of wires together and run one wire to another location. Add-on harnesses can also be used in order to group specific light strips to be used with the dual zone feature. 8. Connect each strip to one of the 6 piece power harnesses and run the single side of the power harness down through the body panel to the underside. 9. Reinstall the headrest panel. 2 LEDGlow Lighting, LLC • LEDGlow.com Note: Recommended mounting locations below. The strips can be mounted in any area that isn’t hot or near moving parts.
I N S T A L L A T I O N G U I D E Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com ® 3 LEDGlow Lighting, LLC • LEDGlow.com 10. Run the harness to the front of the vehicle and use the wire extensions where necessary. Use zip-ties to secure the wire away from any moving parts. 11. Connect the wires from the front of the vehicle to the second 6 piece power harness, along with the lead wires from the light strips on the rear of the vehicle. 12. Secure all the wires using zip-ties. 13. Clean a flat mounting area near the fuse box location, and the back of the control box with an alcohol prep pad. 14. Place the double sided tape on to the control box and secure the control box to the mounting location. 15. Connect the power harnesses from the light strips to the control box. 16. Remove the fuse box cover and using a test light, locate a fuse that receives constant 12-volt power. 17. Attach the optional expandable circuit to the red wire from the control box. 18. Remove the fuse from the fuse box, place it into the circuit, and place the circuit into the fuse's location in the fuse box. 19. Reinstall the fuse box cover. Note: if not using the optional expandable circuit, locate a constant 12-volt power source and connect the red wire from the control box. 20. Attach a ring terminal connector to the black wire from the control box and connect it to a clean reliable grounding source. 21. This control box comes with a blue wire that is used with a brake light signal. In some applications a relay will be needed in order to change the polarity of the trigger so that the brake light feature will work. If relay kit is needed: Install a SPDT 12v Bosch style automotive relay (AE-001-1) and harness, which can be purchased at an automotive parts store. Connect pins 86 (white wire) and 30 (blue wire) together and connect to a constant power source. Connect pin 87 (yellow wire) to the white wires on the light kit. Connect pin 85 (black wire) to the vehicle’s ground switching brake light source. Pin 87a (red wire) is not used. (Harness wire colors may vary.) 22. Pair your device to the control box and power the kit and verify that all of the strips are lit and working properly. Wiring Control Box to Slingshot Red Wire +12v Black Wire Ground Blue Wire Brake Light Control (Relay Kit May Be Required) PIN 30 Blue (Constant 12V) PIN 87a Red (Not Used) PIN 85 Black (Vehicle’s Ground Switch Source) PIN 86White (Constant 12V) PIN 87 Yellow (Power Wire on Kit)
Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com ® LEDGlow Lighting, LLC • LEDGlow.com 4 I N S T A L L A T I O N G U I D E Step 1 Before you can begin using the Advanced Million Color Control Box with Smartphone Control, you must download and install the LEDGlow Motorcycle Control App from the App Store when the app prompts you to download. The app can be found by searching with the keyword, “LEDGlow Motorcycle Control App.” Step 2 Make sure your Advanced Million Color Control Box with Smartphone Control is powered and the LED status indicator is flashing yellow. This will indicate that your control box is ready to be paired to your Apple device. If the LED status indicator is red, disconnect power and reconnect. When the LED turns yellow, pair your device. Step 3 On your Apple device, open the LEDGlow Motorcycle Control App and the device will automatically pair to the controller. Step 4 Press the power button on the app. iOS Pairing Instructions (iOS 7.0 & Up Required): LEDGlow Motorcycle Control App:
5 LEDGlow Lighting, LLC • LEDGlow.com Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com ® I N S T A L L A T I O N G U I D E Step 1 Before you can begin using the Advanced Million Color Control Box with Smartphone Control, you must download and install the LEDGlow Motorcycle Control App from the Google Play Store. The app can be found by searching the store with the keyword, “LEDGlow Motorcycle Control App.” Location services must be turned on. Step 2 Make sure your Advanced Million Color Control Box with Smartphone Control is powered and the LED status indicator is flashing yellow. This will indicate that your control box is ready to be paired to your Android device. If the LED status indicator is red, disconnect power and reconnect. When the LED turns yellow, pair your device. Step 3 On your Android device, open the LEDGlow Motorcycle Control App and the device will automatically pair to the controller. Step 4 Press the power button on the app. LEDGlow Motorcycle Control App: Android Pairing Instructions (Android 4.4 & Up Required):
Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com ® LEDGlow Lighting, LLC • LEDGlow.com 6 I N S T A L L A T I O N G U I D E Device Pairing Tips & Troubleshooting • Connect the blue wire to the 12 volt positive brake light signal wire from the tail light. Any time the brake lever (or brake pedal) is engaged, the kit will enter into the brake light feature as long as it is turned on in the settings section. (See page 7 for further details.) When released, the kit will return to its last setting. If the Hazard feature is on, then the brake feature will not turn on when the brakes are engaged. Please consult the taillight schematic for the vehicle or have it professionally installed. • Disconnect from the control box when you are not using it to preserve your bike's battery life. This can simply be done by turning off Bluetooth in the Settings of the app. Exiting the LEDGlow Motorcycle Control App will not disconnect your iOS device from the controller as the app was designed for multitasking with other apps, such as answering a phone call, or surfing the web and then switching back to the LEDGlow Motorcycle Control App. The same can be done in the Android version by either turning off Bluetooth in the phone's settings app, or by shutting down the app by double tapping on your device’s “Back” button while inside the app. • This control box is designed with a power save mode that automatically turns on after 8 hours of inactivity. This allows the control box to draw minimum power, ensuring it does not drain your Slingshot’s battery. It may take an additional minute when attempting to reconnect back to the controller while it is currently in power save mode, if you are using iOS. To prevent any battery drain when not in use, you can install the control box to a 12 volt switched source to completely remove power at your choosing. • If you have Bluetooth switched “On” in your Settings app and the controller is powered, your iOS device will attempt to connect to the controller whenever it is in range. You do not need to pair and manually connect to the controller after the initial setup if you are using the same device. Your Android device will connect once your device pairs to your control box and you open the app. • In the event that your Android/iOS device cannot connect to the controller, try one of the following: ʂ Restart/Power Cycle your Android/iOS device ʂ Restart your Bluetooth enabled control box by disconnecting power to it for 20 seconds • The control box operates independently from the app. If your Android/iOS device is not available for use, the control box provides full lighting functionality with color, mode, and speed buttons. This kit is designed to fully operate in conjunction with the wireless remote and without the LEDGlow Motorcycle Control App. You cannot save any presets from the remote; therefore, once you reopen the app, the current lighting configuration shown on your device’s screen will be immediately synchronized back to the controller. • You can have only one phone paired to your control box at a time. To pair a different device, disconnect the first device within the device's Bluetooth settings and pair the second device as described on pages 4 or 5, depending on the device's operating system.
7 LEDGlow Lighting, LLC • LEDGlow.com Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com ® I N S T A L L A T I O N G U I D E 1. Power Button • Powers Kit On & Off 2. Color Wheel / Color Control • Slide Your Finger on the Color Wheel for a Custom Color • Tap a Specific Color to Snap to 7 Preset Solid Colors • Blue • Green • Red • White • Yellow • Teal • Purple • Color Control • Press to Toggle Between Primary and Secondary Colors • O – Changes Zone 1 • + – Changes Zone 2 3. Brightness Control Slider • Changes Brightness of Selected Color • Zone Colors Change Independently 4. Speed Control Slider • Adjusts the Speed of the Selected Pattern 5. Mode Selection Drop Down Box • Press to Select from 10 Distinct Patterns in Dual Zone Mode • Press to Select from 5 Distinct Patterns in Single Zone Mode 6. Preset Mode Buttons • Active Preset Pattern Number is Highlighted • Inactive Presets Pattern Numbers are Dim • Save Up to 5 Custom Lighting Configurations 7. Help Button • Press to Visit LEDGlow’s Online Support Portal for Tutorials, Videos, FAQs & Troubleshooting Guides 8. Settings Button • Opens the Settings Section of the App (Refer to Page 7 for Further Details.) 9. Save Button • Saves the Current Active Configuration to the Active Preset Button BLUETOOTH CONNECTIVITY AND CONTROL BOX FUNCTIONS CONTROL BOX LED COLOR INDICATION LED Off Not Powered Solid Red Powered but Not Connected to a Device Flashing Red In Power Save Sleep mode Solid Yellow In pairing mode, Ready to Pair to a Device Solid Green Connected and Ready to Use LEDGlow Mobile App Control Functions 7 8 9 2 3 4 5 6 1 MODE CONTROL FUNCTIONS DUAL ZONE SINGLE ZONE Solid Color Fade Fade w/ White Strobe Strobe Million Color Fade w/ Strobe Fade Opposite Color Fade Strobe Opposite Color Fade Opposite Fade w/ Strobe
Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com ® LEDGlow Lighting, LLC • LEDGlow.com 8 I N S T A L L A T I O N G U I D E Settings 1. Dual Zone Control On/Off The dual zone control feature allows even further color and lighting pattern customization by independently illuminating 2 sections of the Slingshot simultaneously. Each zone has the ability to power 500 SMD LEDs for maximum brightness. With an unlimited color selection and 10 unique lighting patterns, creative lighting options are truly endless. 2. Brake Light Function On/Off The automatic brake light feature illuminates all installed LEDs in red mirroring the Slingshot’s brake lights, safely signaling other motorists on the road. Pull the brake handle and the brake light feature automatically illuminates red LEDs throughout the bike. This feature can be used whether the control box is powered on or off. Brake light illuminates all LEDs in solid red. Blue wire configuration is required for use of this feature. (See page 3, step #21 for detail on how to wire your control box to use this feature.) 3. Brake Pulse On/Off The Brake Pulse option toggles the functionality of the Brake Light Function with red LED strobes in flashes of three. Blue wire configuration is required for use of this feature. (See page 3, step #21 for detail on how to wire your control box to use this feature.) 4. Hazard Lights On/Off The hazard lights feature automatically overrides any color or pattern and flashes amber LEDs alerting other motorists on the road. 5. Low Voltage Shut Off On/Off The app features a first-of-its-kind low voltage shut off setting that helps conserve the life of the Slingshot’s battery. This feature automatically shuts the light kit off when the Slingshot’s battery voltage reads less than 10 volts for more than 60 seconds. 6. Reset Settings & Presets You can reset your app settings to factory default at any time by pressing this button. 1 2 3 4 5 6
9 LEDGlow Lighting, LLC • LEDGlow.com Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com ® I N S T A L L A T I O N G U I D E Wireless Remote Functions This kit provides multiple lighting patterns and several brightness levels, which are easily operated using the included wireless remote. The remote includes four buttons, “A, B, C, D” Reprogramming the Wireless Remote: Make sure your Advanced Million Color Control Box with Smartphone Control is powered and the LED status indicator is solid yellow. This will indicate that your control box is now ready to be paired to your device. If the LED status indicator is red, disconnect power and reconnect. When the LED turns yellow, press and hold the A button on the remote for 5 seconds to complete the pairing process. Troubleshooting: If the kit or lights do not appear to operate, first check the installed inline mini fuse. If the fuse is blown, check the wires on the entire kit to ensure they are not cut, pinched, or scorched. If there is no damage to any of the wires and no water damage is visible to the control box, replace the fuse and test the kit again. If the inline fuse is intact, clean both the positive and negative terminals of the battery. Corrosion to the battery terminals can cause a poor connection or simulate being disconnected. For accessories, add-on kits, replacement parts, and/or Technical Support, please visit www.LEDGlow.com for more information. ONE YEAR NON-TRANSFERRABLE LIMITED WARRANTY AND DISCLAIMER LEDGlow Lighting, LLC (“LEDGlow”) warrants to the original retail consumer purchaser, and not any other purchaser or subsequent owner, that this Product will be free from defects in material or workmanship for a period of one (1) year from the purchase date. This warranty does not cover any Product that is (1) installed incorrectly, or (2) damaged by collisions, vandalism, other accidents, or similar causes. For a period of one (1) year from the date of purchase, at no charge to the Purchaser, LEDGlow will repair or replace this Product if it is determined by LEDGlow to be defective. After the warranty period, the Purchaser must pay all charges for parts and labor. Coverage under this warranty is only valid within the United States, including its territories, as well as in certain other countries. Purchasers should check our website, www.LEDGlow.com, to determine the warranty coverage in the countries in which they are located. LEDGlow does not warrant the installation of the Product, which is the sole responsibility of the Purchaser. Installation should be done by licensed professionals. Improper installation may cause damage to the Product and any vehicle in which it is installed, and may cause burns and electrical injury to individuals. LEDGlow’s warranty does not cover any expenses incurred in removing Products that are defective or re-installing replacement Products in their place. During the warranty period, to have the Product repaired or replaced, the Purchaser must return the Product, freight prepaid by the Purchaser, to LEDGlow (but for customers in the contiguous United States, LEDGlow will pay the shipping charges if any Product fails during the first thirty (30) days after purchase). The Product must be returned in its original carton or in a similar package affording an equal degree of protection. LEDGlow will return the repaired or replaced Product, freight prepaid, to the Purchaser. LEDGlow does not provide Purchasers with temporary replacement units during the warranty period or at any other time. This limited warranty is non-transferrable and will automatically terminate if the original retail consumer purchaser resells the Product or transfers the vehicle on which the Product is installed. An “original retail consumer purchaser” is a person who originally purchases the Product, or a gift recipient of a new Product that is in its original packaging and unopened. Button A: Cycles through 7 solid colors on Zone 1. • Hold to cycle through the million color option on Zone 1. Button B: Cycles through 7 solid colors on Zone 2. • Hold to cycle through the million color option on Zone 2. Button C: Cycles through the 10 Patterns. • Hold to change brightness. Button D: Cycle through 6 speed levels • Hold to turn On/Off Button A&D: Press and hold button A and D together simultaneously to activate the Hazard Mode Feature. • Press any button on the remote to return back to normal function
Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com ® LEDGlow Lighting, LLC • LEDGlow.com 10 I N S T A L L A T I O N G U I D E TERMS AND CONDITIONS 1. NOTIFICATION OF CLAIMS; WARRANTY SERVICE: IF PURCHASER BELIEVES THAT A PRODUCT IS DEFECTIVE IN MATERIAL OR WORKMANSHIP, WRITTEN NOTICE WITH AN EXPLANATION OF THE CLAIM SHALL BE GIVEN PROMPTLY BY PURCHASER TO LEDGLOW. ALL WARRANTY CLAIMS MUST BE MADE WITHIN THE WARRANTY PERIOD, AND ANY PRODUCTS RETURNED TO LEDGLOW MUST BE SHIPPED IN ACCORDANCE WITH LEDGLOW’S PROCEDURES (INCLUDING USE OF RMA NUMBERS SUPPLIED BY LEDGLOW AFTER NOTIFICATION). THE REPAIR OR REPLACEMENT OF ANY PRODUCT OR PART THEREOF SHALL NOT EXTEND THE ORIGINAL WARRANTY PERIOD. THE SPECIFIC WARRANTY ON THE REPAIRED PART ONLY SHALL BE IN EFFECT FOR A PERIOD OF NINETY (90) DAYS FOLLOWING THE REPAIR OR REPLACEMENT OF THAT PART, OR THE REMAINING PERIOD OF THE PRODUCT WARRANTY, WHICHEVER IS GREATER. 2. EXCLUSIVE REMEDY; ACCEPTANCE: PURCHASER’S EXCLUSIVE REMEDY AND LEDGLOW’S SOLE OBLIGATION IS TO SUPPLY (OR PAY FOR) ALL LABOR NECESSARY TO REPAIR ANY PRODUCT FOUND TO BE DEFECTIVE WITHIN THE WARRANTY PERIOD AND TO SUPPLY NEW OR REBUILT REPLACEMENTS FOR DEFECTIVE PARTS. LEDGLOWWILL REFUND THE PURCHASE PRICE FOR SUCH PRODUCT ONLY IF REPAIR OR REPLACEMENT FAILS TO REMEDY THE DEFECT. PURCHASER’S FAILURE TO MAKE A CLAIM AS PROVIDED IN PARAGRAPH 1 ABOVE OR CONTINUED USE OF THE PRODUCT SHALL CONSTITUTE AN UNQUALIFIED ACCEPTANCE OF SUCH PRODUCT AND A WAIVER BY PURCHASER OF ALL CLAIMS THERETO. 3. EXCEPTIONS TO LIMITEDWARRANTY: LEDGLOW SHALL HAVE NO OBLIGATION TO PURCHASER WITH RESPECT TO ANY PRODUCT THAT IS SUBJECTED TO ANY OF THE FOLLOWING: ABUSE, IMPROPER USE, NEGLIGENCE, ACCIDENT, MODIFICATION, FAILURE TO FOLLOW THE OPERATING PROCEDURES OUTLINED IN THE USER’S MANUAL, FAILURE TO FOLLOW THE MAINTENANCE PROCEDURES IN THE SERVICE MANUAL FOR THE PRODUCT, ATTEMPTED REPAIR BY NON-QUALIFIED PERSONNEL, OPERATION OF THE PRODUCT OUTSIDE OF THE PUBLISHED ENVIRONMENTAL AND ELECTRICAL PARAMETERS, OR IF THE PRODUCT’S ORIGINAL IDENTIFICATION (TRADEMARK, SERIAL NUMBER) MARKINGS HAVE BEEN DEFACED, ALTERED, OR REMOVED. LEDGLOW EXCLUDES FROMWARRANTY COVERAGE PRODUCTS SOLD AS IS AND/OR WITH ALL FAULTS. LEDGLOW ALSO EXCLUDES FROMWARRANTY COVERAGE ANY CONSUMABLE ITEMS SUCH AS FUSES AND BATTERIES. All software and accompanying documentation furnished with, or as part of the Product is furnished “AS IS” (i.e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license agreement furnished with the Product. THIS LIMITED WARRANTY IS SUBJECT TO ALL OF THE FOLLOWING TERMS AND CONDITIONS: PROOF OF PURCHASE; REGISTRATION: The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility. Registration of any Product or of this limited warranty is voluntary, and failure to register will not diminish any rights available under this warranty. DISCLAIMER OFWARRANTY EXCEPT FOR THE FOREGOING WARRANTIES, LEDGLOW HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL CODE OR IN ANY OTHER STATE STATUTE. LIMITATION OF LIABILITY THE LIABILITY OF LEDGLOW, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL PURCHASE PRICE OF THE PRODUCT FOR WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL LEDGLOW BE LIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION, REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER. GOVERNING LAW: This non-transferrable limited warranty shall be governed by the law of the State of New Jersey, U.S.A., and the United States of America, excluding their conflicts of laws principles. The courts of Camden County, New Jersey, shall have the exclusive jurisdiction over any legal action with respect to this warranty. This limited warranty gives specific legal rights. You may also have other rights that may vary from state to state or from country to country. Some states or countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. You are advised to consult applicable state or country laws for a full determination of rights. iPhone®, iPod®, iPad® and iTunes® are registered trademarks of Apple Inc., registered in the U.S. and other countries. Android™ is a registered trademark of Google, Inc, registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Bluetooth® is a registered trademark of Bluetooth SIG, Inc. App Store is a service mark of Apple Inc.
I N S T A L L A T I O N G U I D E LEDGLOW L IGHT I NG, LLC • 1 . 877 . LED.GLOW • LEDGLOW.COM 444 COMMERCE LANE SU I TE B, WEST BERL I N, NJ 08091 10/21 Free Lifetime Technical Support Same Day Shipping on Orders Placed By 3PM Eastern 1 Year Limited Warranty ®
RkJQdWJsaXNoZXIy MTIxODAy