10 INSTALLATION GUIDE Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com LEDGlow Lighting, LLC • LEDGlow.com Android Device Pairing Instructions (Android 4.4 & Up Required): 1. Open the Google Play Store. 2. Type in “LEDGlow Golf Cart Control” into the Google Play Store search bar. 3. Download and install the LEDGlow Golf Cart Control App. 4. Confirm location services are enabled if you are using Android 4.4 or higher. To enable locations services, go to Phone Settings > Location > On. Restart the app if location services were disabled after installing the LEDGlow Golf Cart Control App. 5. Power the control box using a 12 volt source. If the LED status indicator light on the control box is yellow, it is ready to be paired with the LEDGlow Golf Cart Control App. The status indicator light on the control box will turn green when the control box is finished pairing. 6. Open the LEDGlow Golf Cart Control App. 7. If the LED status indicator light is red, disconnect power from the control box, then reconnect power. When power is reconnected, the LED status indicator light will turn yellow, indicating the control box is ready to be paired to the app. The status indicator light will turn green when it is finished pairing with the app. SECTION 9: OPTIONAL AUXILIARY SWITCH COURTESY LIGHT FEATURE WIRING INSTRUCTIONS: 1. The Auxiliary Switch Courtesy Light Feature will automatically change all installed lights to a pre-set color, illuminating the ground around the vehicle when the switch is activated. To utilize the optional courtesy lights feature, connect the white wire from the control box and connect to the load side of the auxiliary switch. Be sure that there is only 12 volts on the line side of the auxiliary switch. 2. Please note, some switches can be ground-side controlled. If this is the case, set the courtesy switch type to GND on the settings page of the LEDGlow Golf Cart Control App. 3. By default, the Courtesy Light Feature is turned off in the LEDGlow Golf Cart Control App. Make sure to turn it on in the app’s settings page after completing the wiring steps above. 4. In order to select your optional courtesy light color, open the settings page of the LEDGlow Golf Cart Control App and toggle the Courtesy Light button to on and there will be 7 color options that show up. Please select the color that you would like to use for this feature. If you would like to change your selection toggle the Courtesy Light button off and then on again and the 7 color selection will reappear. SECTION 10: OPTIONAL DISPLAY MODULE FEATURES & INSTALLATION The Display Module serves as a physical representation of how the installed underbody kit, along with any installed add-on kits, will appear on your vehicle. The Display Module mimics all LEDGlow Golf Cart Control App:
RkJQdWJsaXNoZXIy MTIxODAy