11 INSTALLATION GUIDE Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com LEDGlow Lighting, LLC • LEDGlow.com settings from the Golf Cart Control App and replicates them via embedded LEDs throughout the surface of the Module. Replicated settings include color, patterns, and where those lights are illuminated on the vehicle. The Display Module utilizes embedded LEDs within nine specific areas to indicate light color and patterns set to the Underbody, Wheel Well, and Interior/Canopy tubes. The top of the display represents the passenger side of the vehicle, while the bottom represents the driver’s side. The vertical sections at the far left and right represent the front and rear underbody tubes on the vehicle. The corners represent the wheel well tubes. The center of the Display Module features the LEDGlow logo and four buttons which control features and settings of the kit. However, when these buttons and the logo are illuminated, they also represent the color and pattern set to an installed interior kit. Wheel Wells Music Sensor DRIVER SIDE PASSENGER SIDE VEHICLE FRONT VEHICLE REAR Ambient Light Sensor The four buttons on the Display Module are fully operational and are used to adjust the light kit’s settings. Detail on the function of each button can be found below: Power Button: Pressing this button will turn the kit on or off. Pressing and holding this button will turn the lights on the Display Module on or off, but the light kit will remain on. Speed Change Button: Selects different speeds for selected patterns. Changing Color Button: Selects from 7 solid colors: blue, green, teal, red, pink, yellow, and white. Pressing and holding this button will scroll through a million color fade but will stop when the button is released. Mode Button: Changes the current mode displayed. There are 16 distinct modes. Each press of the Mode Button will advance to the next mode. A complete list of modes can be found on page 12. Pressing and holding this button will turn music mode on or off.
RkJQdWJsaXNoZXIy MTIxODAy