5 LEDGlow Lighting, LLC • LEDGlow.com Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com INSTALLATION GUIDE 2” strip under the Air Cleaner 4” strip above the Starter 6” strip on the Frame Down Tube Cross Bar Plug the 2pc Add-On Harness into the open port of your 5pc Power Harness. Connect the following lights to the 2pc Add-On Harness and use Zip Ties to secure the wires, being sure to stay clear of any moving parts or direct heat sources. 6” Strip on the Right Fork Tube 6” Strip on the Right Fork Cover Plug one of the 4pc Add-n Harnesses into the remaining port on the 2pc Add-On Harness. Connect the following lights to the 4pc Add-On Harness and use Zip Ties to secure the wires, being sure to stay clear of any moving parts or direct heat sources. 18” strip on the Right Side Frame Rail 8” strip on the Right Side Swing Arm 12” strip on the Right Side Saddle Bag Mount 6” strip on the Right Side Saddle Bag Mount Once these steps are complete, plug the remaining 4pc Add-On Harness into the open port and repeat this step on the left side. Note: There will be 1 unused plug on the harness that can be used for expanding the kit. Be sure to wrap the unused connector in electrical tape or heat shrink to ensure it stays clean and dry. Reinstall the saddle bags and any panels removed to perform the installation.
RkJQdWJsaXNoZXIy MTIxODAy