4 Tech Suppor t 856.768.5700 Ext.2 • TechSuppor t@LEDGlow.com I NSTAL LAT I ON GU I DE Section 4: App Settings 1. System Power: Turns the entire kit on and off. 2. White Wire: Toggle between Courtesy and Auto-On Features 3. Courtesy Light: Powers on the courtesy light option. You have the ability to choose between 7 preset solid color options for your Courtesy Light. Simply select your preferred color and it will display when this feature is active. 4. Auto-On: This feature will allow the kit to turn on automatically when the control box sees a power source. You can wire the kit to your vehicle’s door pin so that it will be activated instantly when you open the door. 5. Auto Shut-Off: When Auto-On is active, the Auto Shut-Off feature prevents your kit from turning back off after the power source is deactivated. If the kit is connected to the door pin, the kit will stay on after the door has been closed again. 6. White Wire Switch Type: Changes the signal output from the control box to the connection point of the white wire to be either a 12 volt positive source or a ground source to activate the courtesy light function. 7. Low Voltage Shut Off: Cuts the power to the kit if the vehicle’s battery voltage drops under 10 volts for two minutes. 8. Help: Takes you to LEDGlow’s Online Support Portal. 9. Reset Settings: Resets all settings back to default. Section 3: App Features + Functionality 1. Interior Tab: Changes the colors and modes for the interior lights. 2. Settings Tab: Displays setting options within the app. 3. Power Toggle Option: Turns the kit either on or off. 4. Color Bar: Previews the selected colors. 5. Color Wheel: Use the wheel to select the colors you’d like. Up to 3 colors can be assigned to the kit at one time. 6. Brightness: Adjusts the brightness of a selected color. 7. Million Color: When set to “On” the kit will automatically scroll through every color variation available. 8. Fade: Applies a fade effect to an active mode. The fade feature can also be applied when two or more colors are selected from the color wheel, with or without a mode. 9. Speed Bar: Adjusts the level for each mode’s rate of speed to decrease or accelerate movement. 10. Strobe: Applies a strobe effect to an active mode. 11. Mode: Provides a drop down of 5 unique modes. 12. Music Mode: Reacts to the sound of your stereo. Simply toggle the music mode to “ON” to activate this feature. 13. Preset: Provides 5 programmable and customizable preset modes 1. 2. 3. 1. 2. 3. 4. 5. 7. 8. 9. 6. 5. 6. 7. 8. 9. 10. 11. 12. 13. 4.
RkJQdWJsaXNoZXIy MTIxODAy