Tech Suppor t 856.768.5700 Ext.2 • TechSuppor t@LEDGlow.com 1 I NSTAL LAT I ON GU I DE Android Device Pairing Instructions (Android 4.4 & Up Required): LEDGlow Automotive Control App: 1. Connect the two lead cables to the control box output ports, and connect two interior tubes to these cables. Using the linking cables, connect the rest of your tubes to the control box. 2. Open the Google Play Store. 3. Type LEDGlow Automotive Control into the Google Play Store search bar. 4. Download and install the LEDGlow Automotive Control app to your Android device. 5. Confirm location services are enabled if you are using Android 4.4 or higher. To enable locations services, go to Phone Settings > Location > On. Restart your Android device if location services were enabled after installing the app. 6. Power the control box using a 12 volt power source, connect the red wire to positive 12v and the black wire to ground. If the LED status indicator light on the control box flashes yellow, open the app which will pair automatically. The status indicator light on the control box will turn green when the control box is finished pairing. 7. If the LED status indicator light is red, disconnect power from the control box, then reconnect power until the LED status indicator light flashes yellow to pair to the control box. The status indicator light will turn green when it is finished pairing with the app. 8. Once paired and working correctly disconnect the control box from power and disconnect all tubes from the control box, and shut down the app. Proceed to Step 2 to finalize the installation. LEDGlow Automotive Control App: Apple Device Pairing and Testing Instructions (iOS 9.1 & Up Required): 1. Connect the two lead cables to the control box output ports, and connect two interior tubes to these cables. Using the linking cables, connect the rest of your tubes to the control box. 2. Open the iOS App Store. 3. Search the iOS App Store for LEDGlow Automotive Control by typing it into the search bar. 4. Download the LEDGlow Automotive Control app and install it on your iOS device. 5. Power the control box using a 12 volt power source, connect the red wire to positive 12v and the black wire to ground. If the LED status indicator light on the control box flashes yellow, open the app which will pair automatically. The status indicator light on the control box will turn green when the control box is finished pairing. 6. If the LED status indicator light is red, disconnect power from the control box, then reconnect power until the LED status indicator light flashes yellow to pair to the control box. The status indicator light will turn green when it is finished pairing with the app. 7. Once paired and working correctly disconnect the control box from power and disconnect all tubes from the control box, and shut down the app. Proceed to Step 2 to finalize the installation. Section 1: Pairing and Testing
RkJQdWJsaXNoZXIy MTIxODAy