4 INSTALLATION GUIDE Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com LEDGlow Lighting, LLC • LEDGlow.com 4. Clean the proposed mounting surfaces with an alcohol prep pad. The mounting surface should be between 45 and 85 degrees Fahrenheit to achieve the strongest bonding results from the double-sided adhesive tape. : The surface area must be free of all oils, moisture, dirt and wax for the supplied adhesive tape to bond and adhere to the installation surface properly. : To achieve the strongest bond between the tape on the lighting tubes and the golf cart, you can use Adhesion Promoter, which is sold separately from your kit at www.LEDGlow.com. Once the lighting tubes are in place make sure they are permanently secured using screws and/or zip ties. 5. When installing the underbody or wheel well lighting strips, ensure plenty of clearance from direct heat sources and moving parts. The lighting strips are flexible and can be contoured. UNDERBODY 6. Mount the front tube with the wire facing the driver’s side of the cart. 7. Mount the side tubes with the wires facing the front of the cart. 8. Mount the rear tube with the wire facing the passenger side of the cart. WHEEL WELL 9. Mount one of the wheel well tubes to the underside of the body in the wheel well area shining down onto the tire with the wire facing the front of the cart. 10. Repeat step #9 for the remaining wheel well tubes.
RkJQdWJsaXNoZXIy MTIxODAy