3 INSTALLATION GUIDE Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com LEDGlow Lighting, LLC • LEDGlow.com : Please check your state and local laws before installing this LED lighting kit. Every state has different policies and procedures in place regarding aftermarket vehicle accessories. LEDGlow is not responsible for any fines that you may receive while using this lighting kit. This kit is for off-road use only. Note: We recommend using a licensed professional to install this lighting kit. The improper installation of this kit will void all warranties. PLEASE READ THE FOLLOWING INSTRUCTIONS Thoroughly BEFORE INSTALLING AND OPERATING THIS LED GOLF CART KIT. • 4 SEATER GOLF CART BASE KIT INCLUDES:: • (2) 18” Flexible Tubes • (2) 28” Flexible Tubes • Control Box • Underbody Junction Box • Self-Tapping Screws • Zip Ties • 6 SEATER GOLF CART BASE KIT INCLUDES: • (2) 18” Flexible Tubes • (2) 46” Flexible Tubes • Control Box • Underbody Junction Box • Self-Tapping Screws • Zip Ties • OPTIONAL 4 SEATER GOLF CART ADD ON ACCESSORIES: • (4) 8” Flexible Interior Tubes • (4) 12” Flexible Wheel Well Tubes • (2) 36” Flexible Canopy Tubes & (2) 8” Flexible Interior Tubes • OPTIONAL 6 SEATER GOLF CART ADD ON ACCESSORIES: • (4) 36” Flexible Canopy Tubes • (4) 12” Flexible Wheel Well Tubes 1. Temporarily power the kit to ensure proper functionality of this kit before installation. Connect the red wire to the main positive (+) terminal and the black wire to the main negative (-) terminal on the 12-volt power source. 2. Arrange the tubes out on the ground the way you plan on installing them and connect them to the junction box. After powering the kit and determining it is functioning properly, remove the kit from power. 3. Disconnect the negative side of the golf cart’s battery. : Raise and support the golf cart if necessary.
RkJQdWJsaXNoZXIy MTIxODAy