Tech Support 856.768.5700 Ext.2 • TechSupport@LEDGlow.com 3 INSTALLATION GUIDE Section 2: Pairing the Kit to Your Device Android Device Pairing Instructions (Android 4.4 & Up Required): LEDGlow Automotive Control App: 1. Open the Google Play Store. 2. Type in “LEDGlow Automotive Control” into the Google Play Store search bar. 3. Download and install the LEDGlow Automotive Control app. 4. Confirm location services are enabled if you are using Android 4.4 or higher. To enable locations services, go to Phone Settings > Location > On. Restart the app if location services were disabled after installing the LEDGlow Automotive Control app. 5. Open the LEDGlow Automotive Control app. 6. Power the control box using a 12 volt source. If the LED status indicator light on the control box is yellow, it is ready to be paired with the LEDGlow Automotive Control app. The status indicator light on the control box will turn green when the control box is finished pairing. 7. If the LED status indicator light is red, disconnect power from the control box, then reconnect power. When power is reconnected, the LED status indicator light will turn yellow, indicating the control box is ready to be paired to the app. The status indicator light will turn green when it is finished pairing with the app. LEDGlow Automotive Control App: Apple Device Pairing Instructions (iOS 9.1 & Up Required): 1. Open the iOS App Store. 2. Search the iOS App Store for “LEDGlow Automotive Control” by typing it into the search bar. 3. Download the LEDGlow Automotive Control app and install it on your iOS device. 4. Open the LEDGlow Automotive Control app. 5. Power the control box using a 12 volt source. If the LED status indicator light on the control box is yellow, it is ready to be paired with the LEDGlow Automotive Control app. The status indicator light on the control box will turn green when the control box is finished pairing. 6. If the LED status indicator light is red, disconnect power from the control box, then reconnect power. When power is reconnected, the LED status indicator light will turn yellow, indicating the control box is ready to be paired to the app. The status indicator light will turn green when it is finished pairing with the app.
RkJQdWJsaXNoZXIy MTIxODAy