10 Tech Support 856.768.5700 Ext.2 • TechSupport@LEDGlow.com INSTALLATION GUIDE Section 12: App Settings 1. System Power: Turns the entire kit on and off. 2. Courtesy Light: Powers on the courtesy light option. 3. Courtesy Switch Type: Changes the signal output from the control box to the connection point of the white wire to be either a 12 volt positive source or a ground source to activate the courtesy light function. (Refer to page 7 for wiring instructions.) 4. Courtesy Light Color Selection: Allows you to select the color of all the lights when the white courtesy wire is triggered. Cycle the courtesy light Off/On switch to have the color options appear, once selected the color options disappear. Cycle the courtesy light Off/On switch to have the color options reappear. 5. Display Wheel Tab: Allows you to hide the wheel tab if the optional wheel well kit was not installed. 6. Display Interior Tab: Allows you to hide the interior tab if the optional interior kit was not installed. 7. Low Voltage Shut Off: Cuts the power to the kit if the vehicle’s battery voltage drops under 11 volts for two minutes. 8. Display Brightness: Controls the brightness level of the display module. This is only available if the Display Module is plugged into the control box. 9. Auto Dim Display: Enables/Disables the Display Module’s auto-dimming feature. 10. Help: Takes you to LEDGlow’s Online Support Portal. 11. Display Connected: Unlocks music mode capabilities included with the display module. If the Display is not connected, the music features are hidden and a “NO” indicator will appear. To activate music mode, connect the Display Module to the control box and toggle music mode to “ON” in the component tab for the part or part(s) of the light kit to which you would like to assign the music mode feature. 12. Reset Settings: Resets all settings back to default. 1. 2. 4. 3. 5. 6. 7. 9. 8. 10. 11.
RkJQdWJsaXNoZXIy MTIxODAy