LEDGlow Advanced Million Color Sportbike Lights Installation Guide: Custom Illumination for Honda CBR600RR, Ducati Panigale, Kawasaki Ninja ZX-10R, and More

3 INSTALLATION GUIDE Tech Support 856-768-5700 Ext. 2 • TechSupport@LEDGlow.com LEDGlow Lighting, LLC • LEDGlow.com WARNING: THIS PRODUCT IS DESIGNED FOR OFF-ROAD USE ONLY. PLEASE CHECK YOUR LOCAL AND STATE LAWS FOR THE PROPER USE OF THIS PRODUCT. Every state has different policies and procedures in place regarding aftermarket LED lighting accessories. LEDGlow is not responsible for any fines that you may receive while using this lighting kit. Note: We recommend using a licensed professional to install this lighting kit. The improper installation of this kit will void all warranties. We recommend installing each lighting strip using Adhesion Promoter, which allows for a much stronger bond between the adhesive tape on the light strip and the cleaned mounting surface of your Sport Bike. PLEASE READ THE FOLLOWING INSTRUCTIONS THOROUGHLY BEFORE INSTALLING AND OPERATING THIS LED SPORT BIKE LIGHTING KIT. • SPORT BIKE KIT INCLUDES: • (1) Control Box • 1pc Wireless Remote • (1) 2pc (Non Bluetooth) Splitter • (2) 6pc Power Harnesses • (2) 3’ Extensions • (12) 6” Strips • Alcohol Prep Pads • Adhesion Promoter • Zip Ties • Double-Sided Tape for Control Box Upon receiving your new Sport Bike Lighting Kit, we ask that you first test the kit to ensure it is functioning correctly. Plug the male connections from the strips and control box into the female connections of the harnesses. Connect the red power wire to the positive terminal of the battery and the black ground wire to the negative terminal of the battery. Once the wires are temporarily secure, power the kit to ensure full functionality before installing it. If everything appears to be working correctly, turn the kit off and disconnect the power and ground wires from the battery to prepare for installation. 1. Prepare the bike for installation by removing the seat, and the battery panel. Note: The strips can be mounted in any area that isn’t hot or near moving parts. However, we recommend installing the light strips in the locations below. 2. Recommended mounting locations: • Under the frame. • Under the tail. • Under the swing arm. • Behind the fairings lighting up the engine • Behind the fairings lighting up the radiator • In any air vents.

RkJQdWJsaXNoZXIy MTIxODAy